DIY婴儿游戏健身房：为宝宝做一个时尚的木材玩健身房

A DIY I’ve wanted to make for years now is a timber baby play gym! I got the idea to make one when we made Patrick’sTeepee服装架as I thought a miniature version would be ideal for hanging toys. Of course, I wasn’t the only one to get this thought and there are now dozens of tutorials to make similar play gyms.

但是我的一个亲爱的朋友即将拥有她的第二个小伙子，我为她做这个游戏体育馆，所以我想在我身上时，我会沿途拍照。

您可以个性化此作品以适合宝宝的苗圃，例如，通过调色板中添加一些彩色硅胶珠。

Related article:DIY nursery canopy with eucalyptus garland
Related article:为您的孩子创建一个史诗般的户外游乐区

Note:

该设计是使用澳大利亚玩具安全指南的建议创建的，但是尚未对其进行合规测试。我们建议父母使用自己的判断，如果这种设计适合他们，并且始终对婴儿进行监督。

您需要的项目：

• 2块42mm宽x 19mm厚x 1.2m长标准级穿衣松树
• 1 piece of 70cm length dowel (I used 16mm diameter but you could use any thickness between 10mm-20mm depending on your preference)
• 木珠，我们在Etsy上找到了一个很好的选择
• Silicone beads, we got ours from Etsy
• Saw
• Electric drill
• Spade drill bit size of dowel width
• 剪刀
• Ruler
• 铅笔
• 麻线（我用老鼠尾巴）
• 可选的油漆和刷子

Steps:

1.Cut the timber pieces in half and trim the ends on a 15 degree angle (this will make them sit flush against the floor and give the gym stability).

2.Stand two pieces of timber and cross them at the top, creating a teepee shape and use your pencil to mark where the timbers overlap.

3.Find the centre of the overlapped space and mark with a pencil. Pre-drill a hole with a regular drill bit and then use the spade drill bill to drill out your hole where the dowel will feed through.

4.在每块木材上重复此步骤。

5.Optional: You could paint the timber pieces in white or a colour to tie into your nursery theme. Alternatively, you could use painters tape to create a clean edge and just paint the top tips of the planks. Or you could leave the gym completely natural.

6.Drill a small hole 25cm up from the base of each timber plank where you can feed your twine through to help give the gym extra stability (this will prevent it falling on baby!).

7。通过站在两端的两块木材并将销量喂养，构建您的游戏健身房。

8。在游戏健身房每一侧的腿上的两个孔之间进食麻线，并打开双结固定。

9。If your toys are on small timber hoops, you will need to add these before putting the end pieces on your gym. Alternatively, you could simply double twine over the dowel and feed beads on one by one. Finish with a double knot and leave 1cm excess twine to prevent it coming undone. Babies just love munching on the ribbon!

购物我们最喜欢的苗圃装饰

There you have my version of a stylish baby play gym. Will you attempt this DIY? Tell us how you’ve adapted it to suit your nursery!

Find more gorgeous nursery DIY projects here

购物我们最喜欢的苗圃装饰

这篇文章于2017年8月首次发布，但已更新了新的信息和图像。

免责声明：这篇文章包含一些会员链接。这意味着，如果您购买商品，我们可能会收到有关产品出售产品的佣金，而无需向您提供额外费用。